Stanley Roof and Solar installs true standing seam metal roofing throughout Vancouver, WA and the Portland metro, lasting 40 to 70 years and costing $15,000 to $35,000+. As a Malarkey Premium Certified Contractor, metal roofing pairs naturally with solar panel installation.
Metal roofing is one of two materials we install most, alongside asphalt shingle roofing, as part of our broader roofing services work. For homeowners who want a roof built to outlast a typical shingle system, standing seam metal offers decades of extra service life and stronger performance against this region’s rain and wind.
Whether you’re building new through a full roof installation, handling a roof repair on an existing metal roof, or considering a roof replacement and weighing metal against your current shingles, Stanley Roof and Solar walks you through what actually fits your home and budget, not just the material with the highest price tag.
Standing seam metal roofing was designed to shed sustained, heavy rain, exactly the kind of weather this region sees for months at a time. Its continuous panel design leaves far fewer seams and leak points than shingles, resists moss better thanks to its smooth surface, and its concealed-clip fastening holds up notably better in high wind, a real advantage near the Columbia River Gorge’s wind corridor.
Metal roofing costs more to install than asphalt shingles, but the numbers change once you look past the first year. A few reasons property owners choose it anyway:
Not all metal roofing systems perform the same, and the differences matter more than most homeowners realize before comparing them side by side. Here’s a closer look at the options available for your project.
Type | Description | Best For |
Standing seam | Concealed fasteners with raised interlocking seams | Homeowners who want the longest lifespan and a clean, modern look |
Exposed fastener panel | Ribbed metal panels attached with visible screws | A lower-cost metal option, common on outbuildings and some homes |
Stone-coated steel | Steel panels coated to resemble shingles or tile | Homeowners who want the durability of metal with a traditional look |
We install standing seam most often for residential work, since the concealed fastener design holds up best against wind and repeated freeze-thaw or wet-dry cycles over the decades a metal roof is expected to last.
Stanley Roof and Solar provides complete metal roofing services, whether your project involves a full system or a targeted fix.
Choosing between the two comes down to budget, timeline, and how long you plan to stay in the property. Here’s how they compare on the factors that matter most in this climate.
Factor | Metal Roofing | Asphalt Shingles |
Typical lifespan | 40 to 70 years | 15 to 30 years |
Upfront installation cost | Higher, about $10,000 to $40,000 or more nationwide | Lower, about $7,500 to $24,000 nationwide |
Energy efficiency | Reflects up to 70% of solar radiation | Reflects about 22% of solar radiation |
Maintenance | Low, limited to gutters and flashing for the most part | Moderate, with periodic moss and algae cleaning in this climate |
Fire rating | Class A | Class A available on most product lines |
Weight | Lightweight relative to some other materials, but panel type matters | Lightweight, well suited to most existing roof structures |
Neither option is the right answer for every home. If you’re deciding between the two, our asphalt shingle roofing page covers the shingle side of that comparison in more depth.
Metal roofs need far less upkeep than shingles, but they’re not entirely maintenance-free. Watch for these indicators that it’s time for a professional look.
Metal roofing can qualify for the same Class 4 impact-resistant insurance discounts available on some asphalt shingles, but there’s a wrinkle worth knowing before counting on it. Many insurers require a signed cosmetic damage waiver on a metal roof to receive the Class 4 discount. That waiver means hail dents that don’t affect the roof’s function, cosmetic damage only, aren’t covered as a claim, even though the same size hail might total an asphalt shingle roof.
According to the Insurance Information Institute, impact-resistant roofing discounts vary significantly by carrier and state, so confirming the specific terms with your insurer before assuming the savings is a smart step. Metal roofs resist structural damage well in hail, but they can still dent, and understanding that trade-off upfront avoids a surprise if a cosmetic waiver applies to your policy. Stanley Roof and Solar can walk through what your specific carrier requires before you decide.
Cost varies by panel type, roof size, and complexity. Here’s a general range to help set expectations before your free, on-site estimate.
Metal Roofing Type | Typical Cost Range | Expected Lifespan | Best For |
Standing Seam Metal | $15,000–$30,000+ | 40–70 years | Long-term ownership, high wind exposure, solar pairing |
Standing Seam with Reflective Coating | $17,000–$32,000+ | 40–70 years | Homeowners prioritizing energy efficiency |
Metal Roofing for Commercial Buildings | Varies by square footage | 30–50 years, depending on system | Flat and low-slope commercial properties |
Class 4 Impact-Rated Metal | $18,000–$35,000+ | 40–70 years | Storm-prone properties, potential insurance discounts (waiver terms apply) |
These figures reflect typical installation scopes in the Vancouver and Portland metro and aren’t a substitute for an actual quote, since roof size, pitch, and complexity can all shift the final number. Stanley Roof and Solar provides a free, detailed estimate so you know exactly what your specific project will cost before any work begins. Financing options are also available for larger projects.
Metal roofs need far less maintenance than asphalt shingles, but a little routine attention goes a long way toward reaching the upper end of their 40- to 70-year lifespan. Here’s a general guide for this region’s climate.
Maintenance Task | Recommended Frequency | Why It Matters |
Gutter and Downspout Clearing | Twice a year, spring and fall | Prevents overflow and water pooling at the roof edge |
Visual Panel Inspection | Annually, or after major storms | Catches loose panels, denting, or seam separation early |
Fastener and Clip Check | Every 2 to 3 years | Confirms concealed clips remain secure against wind exposure |
Coating and Finish Check | Every 3 to 5 years | Identifies fading or chalking before it affects corrosion resistance |
Debris Removal from Valleys | Twice a year | Prevents trapped moisture and debris buildup at panel transitions |
Roofs Approaching 30+ Years | More frequent visits, every 6 to 12 months | Confirms continued performance as the system ages |
Following this schedule helps a metal roof perform reliably for decades rather than developing avoidable issues. Our roof maintenance service covers this entire list in a single visit, and a free inspection can help determine the right frequency for your specific roof.
Every project follows the same clear process, whether it’s a full replacement, new construction, or an addition. Here’s what to expect from your first estimate to the finished roof.
Metal roofing rewards a careful installer and punishes a careless one, since a poorly detailed seam or flashing point undermines the material’s biggest advantages. Here’s what sets Stanley Roof and Solar apart for homeowners and businesses throughout the region.
Browse completed metal roofing projects in our project gallery to see the quality and craftsmanship we deliver across Vancouver, Clark County, and the Portland metro, and read what local homeowners and businesses say on our testimonials page or Google Business Profile.
No matter where a property sits within Southwest Washington or the greater Portland metro, Stanley Roof and Solar delivers the same true standing seam installation standard on every job. From a full metal roof replacement in Vancouver to new construction in Portland, homeowners and businesses throughout the region get the same certified workmanship and honest guidance on every roof.
Our service areas include Vancouver, WA, Clark County, WA, Battle Ground, WA, Camas, WA, Longview, WA, Woodland, WA, Multnomah County, OR, Portland, OR, Beaverton, OR, Hillsboro, OR, Tigard, OR, and Lake Oswego, OR. For a full view of our coverage, see our service area page.
Whether you’re comparing metal against your current shingles or already sold on the long-term value, the right first step is an honest, in-person look at your roof. Our team will walk you through panel options, provide a clear and detailed estimate, and answer every question along the way, with no pressure to decide on the spot. A properly installed standing seam roof can be the last one you ever need.
Call us at (800) 433-4633 to schedule your free estimate today.
Whether you need a fast repair, a full roof replacement, or a solar system installed by a team that actually understands roofs, you’re one call away from a straight answer and a free estimate.
For many homeowners, yes, most of all if you plan to stay in the home long term. Metal costs more upfront but can outlast two or three asphalt roofs, which changes the math once you look at cost per year of service instead of just the installation quote.
Standing seam panels are continuous, interlocking sheets fastened with concealed clips, while click-lock panels are shorter, exposed-fastener systems sold as a cheaper substitute. Stanley Roof and Solar installs true standing seam only.
Not when it's installed the right way. A metal roof installed over solid decking and underlayment, the way we install every roof, sounds similar to any other roofing material inside the home. The "loud in the rain" reputation traces back to older barn-style installations without solid decking underneath.
Generally, no. Standing seam metal requires a full tear-off to bare decking to ensure proper fit, ventilation, and long-term performance, unlike some asphalt-over-asphalt installations.
Standing seam metal roofing typically costs between $15,000 and $30,000 or more, depending on panel type, roof size, and complexity. Stanley Roof and Solar provides a free, detailed estimate so you know your exact cost before any work begins.
Metal resists structural damage well in hail, though it can dent from larger hail. Denting is cosmetic rather than functional in most cases, which is part of why some insurers require a cosmetic damage waiver before offering a hail-related discount on a metal roof.
Both. We repair metal roofing, including seam and flashing issues, dented or damaged panels, and fastener problems on exposed-fastener systems, in addition to full installations.
No, this is a common misconception. Metal doesn't attract lightning any more than other roofing materials, and it's actually non-combustible, which is a safety advantage if a strike does occur nearby.
Standing seam metal generally requires a minimum roof pitch to shed water properly. Very low-slope or flat roofs typically need a membrane system instead, which we also install for commercial properties.
Yes, a heavier gauge metal generally offers better dent resistance and longevity, though it also comes at a higher cost. We help homeowners weigh gauge options against budget during the estimate.
Whether you need a fast repair, a full roof replacement, or a solar system installed by a team that actually understands roofs, you’re one call away from a straight answer and a free estimate.
