Roof Replacement on a 100-Year-Old Cottage in Carter Park, Vancouver, WA

joe clark
Joe Clark

Owner of Stanley Roof and Solar

Get a Free Quote

More Like This

Get in Touch with Stanley Roof and Solar

Stanley Roof and Solar

Address: 7202 NE Hwy 99 Ste 106-210, Vancouver, WA 98665

Phone: (800) 433-4633

Business Hours:
Monday: Open 24 hours
Tuesday: Open 24 hours
Wednesday: Open 24 hours
Thursday: Open 24 hours
Friday: Open 24 hours
Saturday: Open 24 hours
Sunday: Open 24 hours

Finished Malarkey Vista AR roof in Sienna Blend, Carter Park, Vancouver WA

In September 2026, Stanley Roof and Solar replaced the roof on Gary’s 100-year-old cottage in the Carter Park neighborhood of Vancouver. We kept the cottage’s rolled rake edges, fixed a leak around the chimney with new counter flashing and installed Malarkey Vista AR shingles in Sienna Blend, all before his October vacation and the rainy season.

Project at a glance

  • Location: Carter Park, Vancouver, Clark County, WA
  • Completed: September 2026
  • Service: roof replacement on a historic cottage
  • Shingles: Malarkey Vista AR, Sienna Blend
  • Details: rolled rake edges kept, new chimney counter flashing
  • Warranty: Malarkey Pro

About Carter Park

Carter Park is one of the City of Vancouver‘s recognized neighborhood associations, close to downtown Vancouver.

The challenge and how we solved it

The challenge: the roof was at the end of its life and leaking around a chimney. It was not clear at first if the chimney or the roof was to blame. Gary wanted it done before the rain and before his vacation in early October. The cottage’s rolled rake edges made the job harder, a dormer sat very close to the power mast, and the cedar siding could not be damaged.

The solution: we kept the rolled rake edges so the roof stays true to the cottage’s original design. The chimney flashing was bad, so we installed new counter flashing. Because the roof had past ventilation problems, we added new intake vents and used a breathable underlayment. We worked carefully around the power mast and flashed the dormer properly without hurting the cedar siding.

Rolled rake edges on the 100-year-old cottage in Carter Park, Vancouver WA
Before: The rolled rake edges on the 100-year-old cottage

What we did

  1. Tore off the old roof.
  2. Kept and rebuilt the rolled rake edges to match the original design.
  3. Installed new intake ventilation and Malarkey 1040 Secure Start Permeable underlayment.
  4. Installed new chimney counter flashing to stop the leak.
  5. Flashed the dormer next to the power mast, taking care with the cedar siding.
  6. Installed Malarkey Vista AR shingles in Sienna Blend with 401 Arctic Seal, Smart Start, EZ-Ridge caps, Lifetime Tool pipe flashings and a bath vent.
Tear-off and new chimney flashing in Carter Park, Vancouver WA
During: Tear-off and new chimney flashing

The finished project

Finished Vista AR roof in Sienna Blend in Carter Park, Vancouver WA
After: The finished Malarkey Vista AR roof in Sienna Blend
Completed Sienna Blend roof from above in Carter Park, Vancouver WA
After: The completed Sienna Blend roof from above

Why these materials

Malarkey Vista AR shingles in Sienna Blend. Vista AR carries a Class 4 hail impact rating, the top rating, and is made with NEX rubberized asphalt. Its 3M copper granules help keep the black algae streaks off, which matters on damp, shaded Northwest roofs.

Malarkey 1040 Secure Start Permeable underlayment. A breathable underlayment. It keeps rain out but lets trapped moisture escape from the deck, which helps roofs with weak attic ventilation.

Malarkey 401 Arctic Seal. Self-adhering ice and water barrier for the spots most likely to leak: valleys, eaves and around penetrations. It seals around the nails.

Malarkey Smart Start starter shingles. Starter shingles with rubberized adhesive that hold the eave and rake edges down, where wind gets under a roof first.

Malarkey EZ-Ridge hip and ridge shingles. High-profile hip and ridge caps color matched to the field shingles.

Lifetime Tool pipe flashings and bath vent. Pipe penetrations are one of the most common leak points, so every plumbing vent got a new flashing and the bathroom fan got a new roof vent.

New chimney counter flashing. Counter flashing laps over the step flashing where the roof meets the chimney. Bad flashing there is the most common reason old chimneys leak.

Keeping your roof in good shape

  • Have the chimney flashing checked when you re-roof. On this cottage, the leak was at the chimney.
  • On older homes, ask your roofer about keeping original details like rolled rake edges. They can be rebuilt with modern shingles.
  • Watch for moss. Damp, shaded roofs in the Pacific Northwest grow it fast, and moss holds water against the shingles. A roof maintenance visit can treat it before it lifts the shingle edges.
  • Clean the gutters at least twice a year, in spring and fall, and more often under heavy tree cover, so water does not back up into the eaves.
  • Look the roof over from the ground after big wind or rain. The National Weather Service Portland office issues wind and storm warnings for Clark County, and missing or lifted shingles should be checked before the next storm.

Frequently asked questions

Yes. We kept and rebuilt the rolled rake edges on this 100-year-old cottage.

Bad flashing. We installed new counter flashing where the roof meets the chimney.

Gary chose Malarkey Vista AR in Sienna Blend to match his 100-year-old cottage.

Yes. This cottage is in Carter Park, near downtown Vancouver, WA.

Planning a roof project in Vancouver?

Stanley Roof and Solar inspects roofs across Clark County and the Portland metro and tells you honestly whether you need a repair or a replacement. See our Vancouver, WA roofing services, learn about our roof replacement process, browse more Stanley Roof and Solar projects, or get a free estimate.